Filter
Top Products
*OPT (Option Identification)
Query *OPT?
The *OPT? query identifies the software installed in the Agilent 1670G-series
logic analyzer. This query returns nine parameters. The first parameter
indicates whether you are in the system. The next two parameters indicate
any software options installed, and the next parameter indicates whether
intermodule is available for the system. The last five parameters list the
installed software for the modules in slot A through E for an 16500A
mainframe. However, the Agilent 1670G-series logic analyzers have only one
slot, A; therefore, only the first parameter of the last five will be relevant. A
zero in any of the last eight parameters indicates that the corresponding
software is not currently installed. The name returned for software options
and module software is the same name that appears in the field in the
upper-left corner of the menu for each option or module.
Returned Format
{SYSTEM},{<option>|0},{<option>|0},{INTERMODULE|0},{<module>|0}
,0,0,0,0<NL>
<option> Name of software option.
<module> Name of module software.
Example OUTPUT XXX;"*OPT?"
Common Commands
*OPT (Option Identification)
8–12