Filter
Top Products
ARMLine
Command :ARMLine MACHine{1|2}
The ARMLine command selects which machine (analyzer) generates the arm
out signal. This command is only valid when two analyzers are on. However,
the query is always valid.
Example OUTPUT XXX;":ARMLINE MACHINE1"
Query :ARMLine?
Returned Format [:ARMLine]MACHine<N><NL>
Example OUTPUT XXX;":ARMLine?"
DBLock
Command :DBLock {PACKed | UNPacked}
The DBLock command specifies the data block format that is contained in
the response from a :SYSTem:DATA? query. See Chapters 11 and 27 for
more information on the :SYSTem:DATA command and query.
The PACKed option (default) uploads data in a compressed format. This
option is used to upload data for archiving, or for reloading back into the
analyzer. When an analyzer configuration is saved to disk, the PACKed data
format is always used (regardless of the current DBLock selection).
The UNPacked option uploads data in a format that is easy to interpret and
process. The UNPacked format cannot be downloaded back into the analyzer.
Example OUTPUT XXX;":DBLOCK PACKED"
Module Level Commands
ARMLine
10–5