Filter
Top Products
Query :MACHine{1|2}:STRigger:SEQuence?
The SEQuence query returns the current sequence specification.
Returned Format
[:MACHine{1|2}:STRigger:SEQuence] <number_of_levels>,
<level_of_trigger><NL>
Example OUTPUT XXX;":MACHINE1:STRIGGER:SEQUENCE?"
STORe
Command :MACHine{1|2}:STRigger:STORe<N> <store_qualifier>
The STORe command defines the store qualifier for a given sequence level.
Any data matching the STORe qualifier will actually be stored in memory as
part of the current trace data. The qualifier may be a single term or a
complex expression. The terms A through J are defined by the TERM
command. The meaning of IN_RANGE1 and 2 and OUT_RANGE1 and 2 is
determined by the RANGe command.
Expressions are limited to what you could manually enter through the State
Trigger menu. Regarding parentheses, the syntax definitions below show
only the required ones. Additional parentheses are allowed as long as the
meaning of the expression is not changed.
A detailed example is provided in figure 16-2 on page 16-11.
<N> an integer from 1 to the number of existing sequence levels (maximum 12)
<store_
qualifier>
<qualifier> see "Qualifier" on page 16-7
Example OUTPUT XXX;":MACHINE1:STRIGGER:STORE1 ’ANYSTATE’"
OUTPUT XXX;":MACHINE1:STRIGGER:STORE2 ’OUT_RANGE1’"
OUTPUT XXX;":MACHINE1:STRIGGER:STORE3 ’(NOTC AND NOTD AND
NOTI)’"
STRigger (STRace) Subsystem
STORe
16–17