Filter
Top Products
Features in 291-08 14
Version 291-10
C613-10488-00 REV G
CR00014827
PIM6 2 If an IPv6 accelerator was used, and the upstream router forwarded IPv6
multicast data just before the prune limit timer expired, then the
downstream router sometimes did not send the prune until significantly
after the timer expired.
This issue has been resolved.
--------YY-
CR00015169
MSTP, GUI 2 Using the web-based GUI to set the Point-to-Point Link in the MSTP CIST
Port configuration to a non-default value would generate an error.
This issue has been resolved.
- - - YYYYYYY-
CR00015805
ISAKMP, IPv6 2 During the boot up, the router or switch waited 5 seconds before
beginning ISAKMP prenegotiation. For VPN tunnels over IPsec for IPv6, this
was not long enough for the router or switch’s interfaces to come up before
prenegotiation began.
Also, the router or switch did not obtain the most recent active ISAKMP SA
when multiple SAs existed.
These issues have been resolved. The router or switch now waits 6 seconds,
and obtains the most recent SA and uses that for Phase 2 negotiations.
YYYYYY- - - - -
CR00015964
Switching 2 If the switch had a large number of routes in its forwarding database (FDB),
and the command show switch fdb was used to display the contents of
the FDB, and the switch’s CPU was busy at the time, then the switch
sometimes rebooted.
This issue has been resolved.
--------YY-
CR00016262
Load 2 When attempting to upload files from the switch using TFTP to an IPv4
server address, the router or switch reported an error if IPv6 was not
enabled. It was not possible to upload files using TFTP to an IPv6 server
address at all.
These issues have been resolved.
YYYYYY- - YYY
CR00016340
DHCP
Snooping
2 DHCP Snooping has been enhanced to operate in a customised VLAN ID
translation (VID translation) environment. Previously, DHCP Snooping was
not supported with VID translation.
This issue has been resolved.
- - - YYYYYYY-
CR Module Level Description
AR400
AR7x5
AR7x0S
Rapier i
Rapier w
AT-8800
AT-8600
AT-8700XL
x900-48
AT- 9900
AT-9800