Filter
Top Products
Features in 291-04 64
Version 291-10
C613-10488-00 REV G
CR00014987
Core
Switch
2 If a terminal emulator started up after the router started up, the router did not
display a login or command prompt. This issue occurred with some terminal
emulators (including Tera Term Pro) when connecting to the AR415S router.
This issue has been resolved.
Y–––––––––
CR00015032
PKI 2 When adding a certificate to PKI, if the length of the public key in the certificate
was longer then 2048 bits (256 bytes) the router or switch could reboot.
This issue has been resolved.
YYYYYYYYYY
CR00015071
IP Gateway 2 Routing over a PPP interface could fail if the switch had a default route out an
Ethernet port. The default route switched all packets, even those destined for the
PPP interface.
This issue has been resolved. The resolution involves adding routes over the PPP
interface to the switch hardware tables with an instruction to trap these packets
to the CPU. Therefore these routes now appear in the hardware tables, and can
be displayed by using the command show switch table=ip.
–––––––YYY
CR00015087
Classifier,
DHCP
snooping,
Switch, MACFF
2 When MAC-forced forwarding (MACFF) was running, the switch did not filter
multicast packets correctly.
This issue has been resolved.
–––YYYY–––
CR00015156
Switch 2 On AR750S, AR750S-DP, and AR400 Series routers, if a user set a switch port to
autonegotiate speed and duplex mode (by using the command set switch
port=number speed=auto), the link went down.
This issue has been resolved.
Y–Y–––––––
CR00015207
Firewall 2 If a VoIP call came in through the SIP ALG from the public side of the firewall and
was then transferred by the device on the private side, the firewall session was
not always updated. When this happened, the person to whom the call was
transferred could not hear the person who had called.
This issue has been resolved.
YYYYY––––Y
CR Module Level Description
AR400
AR7x5
AR7x0S
Rapier i
AT-8800
AT-8600
AT-8700XL
x900-48
AT- 9900
AT-9800