Filter
Top Products
Features in 291-08 32
Version 291-10
C613-10488-00 REV G
Level 4
CR00017019
Port
Authentication
3 On termination of an 802.1x session, an accounting message is sent to the
Radius server. This enhancement implements the Acct-Input-Octets,
Acct-Output-Octets, Acct-Input-Packets, and Acct-Output-Packets fields in
the message.
Note that this enhancement only applies to ports in single-supplicant mode.
These fields in the accounting message for ports in multi-supplicant mode
still all have a value of 0.
YYYYYYYYYYY
CR Module Level Description
AR400
AR7x5
AR7x0S
Rapier i
Rapier w
AT-8800
AT-8600
AT-8700XL
x900-48
AT- 9900
AT-9800
CR00011228
GUI, Switch 4 The Diagnostics > Layer 2 Forwarding Database page of the GUI displayed
extra internal (SYS or CPU) entries.
This issue has been resolved. The GUI and the command show switch fdb
now display the same information.
–––YYYYY–––
CR00013409
Switch 4 Previously, if you used the ? or Tab keys to obtain help for the set switch
ageingtimer command, the resulting help said that valid entries were from
0 to 4294967295. However, the correct range of values is from 16 to
4080 seconds for AR750S routers and from 10 to 630 seconds for AR770S
routers.
This issue has been resolved. The “?” help now displays the correct ranges.
––Y––––––––
CR00014205
OSPF 4 The command purge ospf did not delete OSPF redistribution definitions.
This issue has been resolved.
YYYYYYYYYYY
CR00014302
TTY 4 If the router or switch configuration file contained the command set tty
idle, the router or switch produced a corrupted log message when it
started up.
This issue has been resolved.
YYYYYYYYYYY
CR Module Level Description
AR400
AR7x5
AR7x0S
Rapier i
Rapier w
AT-8800
AT-8600
AT-8700XL
x900-48
AT- 9900
AT-9800