Filter
Top Products
Features in 291-08 21
Version 291-10
C613-10488-00 REV G
Level 3
CR Module Level Description
AR400
AR7x5
AR7x0S
Rapier i
Rapier w
AT-8800
AT-8600
AT-8700XL
x900-48
AT- 9900
AT-9800
CR00000503
PKI 3 Some PKI commands (including add pki ldap, create pki enroll, and
create pki keyupdate) only worked if their parameters were entered in a
particular order.
This issue has been resolved.
YYYYYYYYYYY
CR00001106
3 The command add fire policy=name rule=number act=allow int=int
ip=ipadd list=filename would incorrectly be rejected, with an error
message stating that list and ip were mutually exclusive.
This issue has been resolved, so that list and ip can be used together in the
same firewall rule.
YYYYYY- - - - Y
CR00001438
TACACS+ 3 If TACACS+ was used for authentication and the TACACS+ server went
down during an authentication attempt, the router or switch added the
attempted login names to the TACACS+ user list (as displayed in output of
the show tacplus user command). However, the router or switch correctly
did not log users in with those names.
This issue has been resolved.
YYYYYYYYYYY
CR00002587
IP Gateway 3 Sometimes an incorrect error message was printed if a user tried to enable
IP multicast switching on a device that did not support it.
This issue has been resolved.
---YYYYY---
CR00003354
Firewall 3 The firewall message “Port scan from <source> is underway” was repeated
more times than messages about other attack events. This could cause
confusion.
This issue has been resolved. The message is now displayed with the same
frequency as other firewall attack event messages.
YYYYYY- - - - Y
CR00003356
Firewall 3 The firewall sometimes did not report that an attack had finished until
several minutes after it actually finished.
This issue has been resolved.
YYYYYY- - - - Y