Filter
Top Products
Features in 291-04 77
Version 291-10
C613-10488-00 REV G
CR00012602
MSTP 4 If the command set mstp cist port=value was entered with no other
parameters, the resulting error message (“One or more parameters may be
missing”) was displayed as an INFO message.
This issue has been resolved. The message now displays as an ERROR message.
–––YYYYYY–
CR00013045
SNMP, Core,
TTY
4 The MIB object hrSystemNumUsers displayed the number of login users since the
router or switch started up, instead of the number of currently-active login users.
This issue has been resolved.
YYYYYYYYYY
CR00013112
IP Gateway 4 The blackhole parameter of the commands add and set ip route had no “?”
help description.
This issue has been resolved.
–––––––YY–
CR00013188
LACP 4 Previously, when an attempt to add a port to LACP was unsuccessful, the switch
displayed an appropriate warning message followed incorrectly by an “operation
successful” message.
This issue has been resolved. The switch no longer displays “operation
successful” when port addition fails.
–––YYYYYY–
CR00013221
IP Gateway 4 The output of the command show ip route did not contain any spaces between
the route tag value and the metric value when the tag value was long.
This issue has been resolved by adding the missing spaces. The content and
relative position of the values have not changed.
YYYYYYYYYY
CR00013260
TACPLUS 4 If a user added a TACACS+ server when TACACS+ was not enabled, previously
the router or switch displayed a single “info” message that indicated that the
module was not enabled, but did not display a message confirming the server
addition. However, the router or switch did add the server.
This issue has been resolved. TACACS+ is now consistent with other modules—
the router or switch displays the following “warning” and “info” messages:
Warning (2111049): The TACP module is not enabled.
Info (1111003): Operation successful.
YYYYYYYYYY
CR Module Level Description
AR400
AR7x5
AR7x0S
Rapier i
AT-8800
AT-8600
AT-8700XL
x900-48
AT- 9900
AT-9800