Filter
Top Products
Features in 291-05 38
Version 291-10
C613-10488-00 REV G
Features in 291-05
Software Maintenance Version 291-05 includes the resolved issues and enhancements in the following tables. In the tables, for each product series:
■ “Y” indicates that the resolution is available in Version 291-05 for that product series.
■ “–” indicates that the issue did not apply to that product series.
Level 1
No level 1 issues
Level 2
CR Module Level Description
AR400
AR7x5
AR7x0S
Rapier i
AT-8800
AT-8600
AT-8700XL
x900-48
AT- 9900
AT-9800
CR00007737
IGMP
Snooping
2 When a port left a multicast group, the router or switch assigned the All Groups
port to that multicast group. This could be seen in the output of the command
show ip igmp—the list of ports for the group would include the All Groups port.
This issue has been resolved.
Y- YYYYYYYY
CR00010003
CR00011533
WAN load
balancer,
Firewall
2 The router rebooted if a user cleared all active WAN load balancer sessions on a
router that had more than approximately 15000 active sessions.
This issue has been resolved
Also, the maximum session limit for the WAN load balancer should be 2 * the
firewall session limit. On AR415S and AR442S routers, users can increase the
firewall session limit by adding special feature licenses. Previously, if the firewall
session limit changed, it was necessary to reboot the router to update the WAN
load balancer session limit.
This issue has been resolved. The WAN load balancer limit now updates when
you enable the firewall session license.
YYY-------