Filter
Top Products
Features in 291-04 79
Version 291-10
C613-10488-00 REV G
CR00014151
VLAN 4 The following error message:
“Error (3089399): Operation not allowed on a .NESTED port.”
contained an extraneous “.” before the word “NESTED”.
This issue has been resolved. The “.” has been removed.
–––––––YY–
CR00014170
Core 4 The show exception command did not display the correct exception type for
watchdog exceptions on AR750S, AR750S-DP, or AR770S routers.
This issue has been resolved. The correct exception type is now displayed.
––Y–––––––
CR00014250
LLDP 4 In output of the command show lldp localdata, the field lldpLocSysDesc gives
information about the router or switch model and software version. Previously,
this information was sometimes split incorrectly across 3 rows.
This issue has been resolved. The information now displays correctly.
YYYYYYYYYY
CR00014318
DDNS 4 If a user made a configuration change to DDNS (dynamic DNS) when DDNS was
not enabled, previously the router displayed a message that indicated that the
module was not enabled, but did not display a message confirming the change.
However, the router did make the change.
This issue has been resolved. DDNS is now consistent with other modules—the
router displays the following “warning” and “info” messages:
Warning (2142049): The DDNS module is not enabled.
Info (1142003): Operation successful.
Y–Y–––––––
CR00014367
GUI 4 The GUI included pages for configuring MAC-based port authentication.
However, this feature is not available on AT-9800 Series switches.
This issue has been resolved. The GUI pages have been removed.
–––––––––Y
CR00014712
Firewall 4 If the router or switch renumbered a firewall rule, it displays a message.
Previously, this message had a status of “info” instead of “warning”.
This issue has been resolved.
YYYYY––––Y
CR Module Level Description
AR400
AR7x5
AR7x0S
Rapier i
AT-8800
AT-8600
AT-8700XL
x900-48
AT- 9900
AT-9800