Allied Telesis AT-WA1104G-10 Network Router User Manual


 
Features in 291-04 65
Version 291-10
C613-10488-00 REV G
CR00015348
GUI 2 The GUI could not be used to access the dual power supply AR750S-DP router.
This issue has been resolved. The GUI resource file to use is
750s_281-06_en_d.rsc.
––Y–––––––
CR00015396
IP Gateway 2 If you defined an IP filter without specifying the optional type parameter, the
default value of type=traffic was added to the filter in the dynamic
configuration. This prevented you from using the configuration file with software
version 2.7.6 and older releases.
This issue has been resolved. The type parameter is only added to the dynamic
configuration if you enter a value for it.
YYYYYYYYYY
CR00015474
Ethernet 2 If an AR020 PRI E1/T1 PIC was installed on an AR415S, the router’s Ethernet
interface stopped receiving unicast or multicast packets correctly—it only
received broadcasts correctly.
This issue has been resolved.
Y–––––––––
CR00015638
Switch 2 On AR770S routers, when generating multicast or broadcast CPU traffic out a
VLAN that had multiple active switch ports in it, the traffic would only egress
port 1.
This issue has been resolved.
––Y–––––––
CR00015697
Switch 2 Mirroring the traffic on port 1 of any line card caused the switch to lose packets.––––––––––
CR00015925
ADSL 2 The ADSL Annex B firmware has been updated on AR441S routers. This improved
interoperability with some DSLAMs.
Y–––––––––
CR Module Level Description
AR400
AR7x5
AR7x0S
Rapier i
AT-8800
AT-8600
AT-8700XL
x900-48
AT- 9900
AT-9800