Filter
Top Products
Features in 291-05 49
Version 291-10
C613-10488-00 REV G
Level 3
CR Module Level Description
AR400
AR7x5
AR7x0S
Rapier i
AT-8800
AT-8600
AT-8700XL
x900-48
AT- 9900
AT-9800
CR00008225
Core 3 Some early software versions, on some products, supported the command show
system temperature. This command was deprecated after version 2.6.4. If a
user entered this command on any product, the following message was
displayed:
Info (1034107): SHOW SYSTEM TEMPERATURE is no longer available. Please
use SHOW SYSTEM ENVIRONMENTAL instead.
However, only the following products use the show system environmental
command to display the temperature: AR750S and AR770S routers, and
AT-8600, AT-8800, AT-8948, x900-48, and AT-9900 series switches.
Other products use show system instead. On the other products, the above
error message was incorrect because it stated that the show system
environmental command was available.
This issue has been resolved. On products that do not use show system
environmental, the following error message is displayed if you enter the show
system temperature command:
Info (1034090): Command unavailable on this product.
YY- Y- - Y- - Y
CR00009036
File 3 If a user tried to copy a small file (less than 32 bytes) in Flash when there was not
enough free Flash space for the file and its header, the router or switch did not
generate an error message, and the copying could appear to have succeeded.
This issue has been resolved. The error message:
Insufficient space to store file [file name]
is now displayed under those conditions.
YYYYYYYYYY
CR00010518
CR00010710
Core 3 The show cpu statistics were unnecessarily inaccurate. For example, a router or
switch that was effectively idle showed a CPU usage of 10% to 12%.
This issue has been resolved. When the router or switch is effectively idle, the CPU
usage now displays as less than 5%.
-Y------Y-