Allied Telesis AT-IFS802SP Switch User Manual


  Open as PDF
of 105
 
6 AT-IFS802SP/POE(W)-80 User Manual
Chapter 1 Introduction
The 8 10/100TX + 2 10/100/1000T/Mini-GBIC Combo with 8 PoE Injectors Managed Industrial Switch is
a cost-effective solution and meets the high reliability requirements demanded by industrial applications.
Usingberportcanextendtheconnectiondistancethatincreasesthenetworkelasticityandperformance.
Besides, the industrial switch provides the PoE function for kinds of Powered Devices to receive power as
well as data over the RJ-45 cable.
1.1 Hardware Features
Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX/ FX
IEEE802.3ab 1000Base-T
IEEE802.3zGigabitber
IEEE802.3x Flow Control and Back Pressure
IEEE802.3ad Port trunk with LACP
IEEE802.3af Power over Ethernet
IEEE802.1d Spanning Tree/ IEEE802.1w Rapid Spanning Tree
IEEE802.1p Class of Service
IEEE802.1Q VLAN Tag
IEEE 802.1x User Authentication (Radius)
IEEE802.1ab LLDP
Switch
Architecture
Back-plane (Switching Fabric): 5.6Gbps
Packet throughput ability(Full-Duplex): 8.3Mpps @64bytes
Transfer Rate
14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Fiber Ethernet port
Packet Buffer 1Mbits
MAC Address 8K MAC address table
Flash ROM 4Mbytes
DRAM 32Mbytes
Connector
10/100TX: 8 x RJ-45
10/100/1000T/ SFP Combo: 2 x RJ-45 + 2 x
100/1000 SFP sockets
RS-232 connector: RJ-45 type
 previous next