Allied Telesis AT-IFS802SP Switch User Manual


  Open as PDF
of 105
 
32 AT-IFS802SP/POE(W)-80 User Manual
BackupCongurationinterface
YoucanbackupthecurrentcongurationfromashROMtotheTFTPserverforthepurposeof
recoveringthecongurationlater.Ithelpsyoutoavoidwastingtimeonconguringthesettingsby
backinguptheconguration.
TFTP Server IP Address• : Type in the TFTP server IP.
Backup File Name• :Typeinthelename.
Click•
6.7.3BackupConguration
A ppl y
6.8 System Event Log
This page allows the user to decide whether to send the system event log, and select the mode which
the system event log will be sent to client only, server only, or both client and server. What kind of
event log will be issued to the client/server depends on the selection on the EventConguration
tab.Therearevetypesofevent—DeviceColdStart,DeviceWarmStart,AuthenticationFailure,
X-Ring Topology Change, and Port Event—available to be issued as the event log.
Syslog Client Mode• :Selectthesystemlogmode—ClientOnly,ServerOnly,orBoth.‘Client
Only’ means the system event log will only be sent to this interface of the switch, but on the other
hand‘ServerOnly’meansthesystemlogwillonlybesenttotheremotesystemlogserverwith
itsIPassigned.Ifthemodeissetin‘Both’,thesystemeventlogwillbesenttotheremoteserver
and this interface.
System Log Server IP Address• :Whenthe‘SyslogMode’itemissetasServerOnly/Both,the
user has to assign the system log server IP address to which the log will be sent.
Click to refresh the event log displaying area.•
Click to clear all the current event logs.•
Make sure the selected mode is correct, and click to have the setting take effect.•
6.8.1SyslogConguration
Reload
Clear
A ppl y
 previous next