Allied Telesis AT-IFS802SP Switch User Manual


  Open as PDF
of 105
 
61AT-IFS802SP/POE(W)-80 User Manual
Use a strict priority scheme:Alwaysthehigherqueuewillbeprocessedrst,exceptthe
higher queue is empty.
Priority Type: There are 5 priority type selections available—Port-based, TOS only, COS
only,TOSrst, and COSrst. Disable means no priority type is selected.
Clicktohavethecongurationtakeeffect.
Clicktohavethecongurationtakeeffect.•
>
>
A ppl y
Conguretheprioritylevelforeachport.Withthedrop-downselectionitemofPriority
Type above being selected as Port-based, this control item will then be available to set the
queuing policy for each port.
Port x• : Each port has 4 priority levels—High, Middle, Low, and Lowest—to be chosen.
Clicktohavethecongurationtakeeffect.•
6.21.2 Port-based Priority
A ppl y
QoSCongurationinterface
 previous next