65AT-IFS802SP/POE(W)-80 User Manual
6.24LLDPConguration
LinkLayerDiscoveryProtocol(LLDP)isdenedintheIEEE802.1AB,itisanemergingstandardwhich
providesasolutionforthecongurationissuescausedbyexpandingLANs.LLDPspecicallydenes
a standard method for Ethernet network devices such as switches, routers and wireless LAN access
points to advertise information about themselves to other nodes on the network and store the
information they discover. LLDP runs on all 802 media. The protocol runs over the data-link layer only,
allowing two systems running different network layer protocols to learn about each other.
LLDP Protocol• : Pull down the selection menu to disable or enable LLDP function.
LLDP Interval• : Set the interval of advertising the switch’s information to other nodes.
Click . •
A ppl y
LLDP Interface
6.25Security—802.1X/RadiusConguration
802.1xis anIEEEauthenticationspecication whichpreventstheclient fromaccessinga wireless
access point or wired switch until it provides authority, like the user name and password that are
veriedbyanauthenticationserver(suchasRADIUSserver).
AfterenablingtheIEEE802.1Xfunction,youcanconguretheparametersofthisfunction.
IEEE 802.1x Protocol• : Enable or disable 802.1x protocol.
Radius Server IP• : Assign the RADIUS Server IP address.
Server Port• :SettheUDPdestinationportforauthenticationrequeststothespecied
RADIUS Server.
Accounting Port• :SettheUDPdestinationportforaccountingrequeststothespecied
RADIUS Server.
Shared Key• : Set an encryption key for using during authentication sessions with the
speciedRADIUSserver.ThiskeymustmatchtheencryptionkeyusedontheRADIUS
Server.
NAS,Identier• :SettheidentierfortheRADIUSclient.
Click .•
6.25.1SystemConguration
A ppl y