Allied Telesis AT-IFS802SP Switch User Manual


  Open as PDF
of 105
 
49AT-IFS802SP/POE(W)-80 User Manual
6.17 Rate Limiting
Youcansetupeveryport’sbandwidthrateandframelimitationtype.
Ingress Limit Frame type• :selecttheframetypethatwantstolter.Therearefourframetypes
for selecting:
All
Broadcast/Multicast/Flooded Unicast
Broadcast/Multicast
Broadcast only
Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Broadcast only types
are only for ingress frames. The egress rate only supports All type.
>
>
>
>
Rate Limiting interface
All the ports support port ingress and egress rate control. For example, assume port 1 is 10Mbps, •
users can set it’s effective egress rate is 1Mbps, ingress rate is 500Kbps. The switch performs the
ingressratebypacketcountertomeetthespeciedrate
Ingress: Enter the port effective ingress rate (The default value is “0”).
Egress: Enter the port effective egress rate (The default value is “0”).
And then, click to apply the settings•
>
>
A ppl y
 previous next