Allied Telesis AT-IFS802SP Switch User Manual


  Open as PDF
of 105
 
40 AT-IFS802SP/POE(W)-80 User Manual
6.12 User Authentication
Change web management login user name and password for the management security issue.
User name• :Typeinthenewusername(Thedefaultis‘root’)
Password• :Typeinthenewpassword(Thedefaultis‘root’)
Conrmpassword• : Re-type the new password
And then, click •
A ppl y
User Authentication interface
6.13 Port Statistics
The following chart provides the current statistic information which displays the real-time packet
transfer status for each port. The user might use the information to plan and implement the network,
orcheckandndtheproblemwhenthecollisionorheavytrafcoccurs.
Port• : The port number.
Type• : Displays the current speed of connection to the port.
Link• :Thestatusoflinking—‘Up’or‘Down’.
State• : It’s set by Port Control. When the state is disabled, the port will not transmit or receive
any packet.
Tx Good Packet• : The counts of transmitting good packets via this port.
Tx Bad Packet• : The counts of transmitting bad packets (including undersize [less than 64 octets],
oversize, CRC Align errors, fragments and jabbers packets) via this port.
Rx Good Packet• : The counts of receiving good packets via this port.
Rx Bad Packet• : The counts of receiving good packets (including undersize [less than 64 octets],
oversize, CRC error, fragments and jabbers) via this port.
Tx Abort Packet• : The aborted packet while transmitting.
Packet Collision• : The counts of collision packet.
Packet Dropped• : The counts of dropped packet.
Rx Bcast Packet• : The counts of broadcast packet.
Rx Mcast Packet• : The counts of multicast packet.
Click button to clean all counts.•
A ppl y
 previous next