Allied Telesis AT-IFS802SP Switch User Manual


  Open as PDF
of 105
 
75AT-IFS802SP/POE(W)-80 User Manual
Appendix A—RJ-45 Pin Assignment
The UTP/STP ports will automatically sense for Fast Ethernet (10Base-T/100Base-TX connections), •
or Gigabit Ethernet (10Base-T/100Base-TX/1000Base-T connections). Auto MDI/MDIX means
that the switch can connect to another switch or workstation without changing straight through
orcrossovercabling.Seetheguresbelowforstraightthroughandcrossovercableschematic.
10 /100BASE-TX Pin outs•
With10/100BASE-TX cable, pins 1 and 2 are used for transmitting data, and pins 3 and 6 for
receiving data.
RJ-45 Pin Assignments•
Pin Number Assignment
1 Tx+
2 Tx-
3 Rx+
6 Rx-
[note]
“+” and “-” signs represent the polarity of the wires that make up each wire pair.
Pin Number MDI-X Signal Name MDI Signal Name
1 Receive Data plus (RD+) Transmit Data plus (TD+)
2 Receive Data minus (RD-) Transmit Data minus (TD-)
3 Transmit Data plus (TD+) Receive Data plus (RD+)
6 Transmit Data minus (TD-) Receive Data minus (RD-)
The table below shows the 10/100BASE-TX MDI and MDI-X port pin outs.
RJ-45 Pin Assignments
 previous next