Filter
Top Products
7AT-IFS802SP/POE(W)-80 User Manual
Network Cable
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable
EIA/TIA-568 100-ohm (100m)
1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable
EIA/TIA-568 100-ohm (100m)
Optical Fiber
Distance:
Multi mode:
0 to 5 km, 1300 nm (50/125 μm, 800 MHz*km)
0 to 4 km, 1300 nm (62.5/125 μm, 500 MHz*km)
Single mode:
0 to 40 km, 1310 nm (9/125 μm, 3.5 PS/(nm*km))
0 to 80 km, 1550 nm (9/125 μm, 19 PS/(nm*km))
Min. TX Output:
Multi mode: -20 dBm
Single mode: 0 to 40 km, -5 dBm; 0 to 80 km, -5 dBm
Max. TX Output:
Multi mode: -14 dBm
Single mode: 0 to 40 km, 0 dBm; 0 to 80 km, 0 dBm
Sensitivity:
-36 to -32 dBm (Single mode); -34 to -30 dBm (Multi mode)
PoE pin
assignment
RJ-45 port # 1~# 8 support IEEE 802.3af End-point, Alternative A mode. Per port
provides 15.4W ability.
Positive (VCC+): RJ-45 pin 1,2. Negative (VCC-): RJ-45 pin 3,6.
Protocol CSMA/CD
LED
Per unit: Power (Green), Power 1 (Green), Power 2 (Green), Fault (Red), Master
(Green), FWD (Green)
8 port 10/100: Link/Activity (Green), Full duplex/Collision (Amber)
SFP port: LNK/ACT(Green), 1000T: LNK/ACT(Green), 1000M(Green)
Power Supply
External Power Supply: DC 48V, Redundant power DC 48V and connective removable
terminal block for master and slave power
Power
116Watts (Full load)
Operating
Humidity
5% to 95% (Non-condensing)
Operating
Temperature
PIFE-802GBTMA: -10
o
C ~ 60
o
C
PIFE-802GBTMAE: -40
o
C ~ 75
o
C
Storage
Temperature
-40
o
C ~ 85
o
C
Case Dimension
IP-30, 72mm (W) x 105mm (D) x 152mm (H)
Installation
DIN rail and wall mount ear