Allied Telesis AT-IFS802SP Switch User Manual


  Open as PDF
of 105
 
28 AT-IFS802SP/POE(W)-80 User Manual
6.5IPConguration
TheswitchisanetworkdevicewhichneedstobeassignedanIPaddressforbeingidentiedonthe
network. Users have to decide a means of assigning IP address to the switch.
DHCP Client• : Enable or disable the DHCP client function. When DHCP client function is enabled,
the switch will be assigned an IP address from the network DHCP server. The default IP address
will be replaced by the assigned IP address on DHCP server. After the user clicks Apply, a popup
dialog shows up to inform the user that when the DHCP client is enabled, the current IP will lose
andusershouldndthenewIPontheDHCPserver.
IP Address• : Assign the IP address that the network is using. If DHCP client function is enabled,
thisswitchisconguredasaDHCPclient.ThenetworkDHCPserverwillassigntheIPaddressto
the switch and display it in this column. The default IP is 192.168.16.1 or the user has to assign an
IP address manually when DHCP Client is disabled.
Subnet Mask• : Assign the subnet mask to the IP address. If DHCP client function is disabled, the
userhastoassignthesubnetmaskinthiscolumneld.
Gateway• : Assign the network gateway for the switch. If DHCP client function is disabled, the user
hastoassignthegatewayinthiscolumneld.Thedefaultgatewayis192.168.16.254.
DNS1• : Assign the primary DNS IP address.
DNS2• : Assign the secondary DNS IP address.
And then, click•
A ppl y
IPcongurationinterface
 previous next