Allied Telesis AT-IFS802SP Switch User Manual


  Open as PDF
of 105
 
24 AT-IFS802SP/POE(W)-80 User Manual
5.3 Login in the Console Interface
When the connection between Switch and PC is ready, turn on the PC and run a terminal emulation
program or HyperTerminal and congure its communication parameters to match the following
default characteristics of the console port:
Baud Rate: 9600 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None
Havingnishedtheparametersettings,click‘OK’.Whentheblankscreenshowsup,pressEnterkey
tohavetheloginpromptappears. Keyin‘manager’(defaultvalue) forUsernameand“friend”for
Password (use Enter key to switch), then press Enter and the Main Menu of console management
appears.Pleaseseebelowgureforloginscreen.
5.4 CLI Management
The system supports the console management—CLI command. After you log in on to the system, you
will see a command prompt. To enter CLI management interface, type in “enable” command.
The following table lists the CLI commands and description.
CLI command interface
 previous next