Allied Telesis AT-IFS802SP Switch User Manual


  Open as PDF
of 105
 
25AT-IFS802SP/POE(W)-80 User Manual
5.5 Commands Level
Modes Access Method Prompt Exit Method About This Mode1
User EXEC
Begin a session with
your switch.
switch>
Enter logout
or quit.
The user commands available at
the user level are a subset of those
available at the privileged level.
Use this mode to
•Performbasictests.
•Displaysysteminformation.
Privileged
EXEC
Enter the enable
command while in
User EXEC mode.
switch#
Enter disable
to exit.
The privileged command is the
advanced mode.
Use this mode to
•Displayadvancedfunctionstatus
•Saveconguration
Global
Conguration
Enterthecongure
command while in
privileged EXEC
mode.
switch
(cong)#
To exit to
privileged
EXEC mode,
enter exit or
end
Usethismodetocongurethose
parameters that are going to be
applied to your switch.
VLAN
database
Enter the vlan
database command
while in privileged
EXEC mode.
switch (vlan)#
To exit to
user EXEC
mode, enter
exit.
UsethismodetocongureVLAN-
specicparameters.
Interface
conguration
Enter the interface
of fast Ethernet
command (with a
specicinterface)
while in global
congurationmode.
switch
(cong-if)#
To exit
to global
conguration
mode, enter
exit.
To exit to
privileged
EXEC mode,
enter exit or
end.
TUsethismodetocongure
parameters for the switch and
Ethernet ports.
 previous next