Filter
Top Products
71AT-IFS802SP/POE(W)-80 User Manual
6.27 Power over Ethernet
This segment shows the Power over Ethernet function.
PoE Status
Actual Power Consumption• : This column shows the real-time total power consumption.
Main Supply Voltage• : This column shows the output voltage of the system for PoE ports.
Firmware Version• :ThiscolumnshowsthePoEchip’srmwareversion.
Port Knockoff Disabled• : Power Management state where one or more PDs have been powered
down so that a higher priority PD may be powered up and yet not exceed the maximum total
power available for PDs.
AC Disconnect• : Tick this checkbox to monitor the AC impedance on the port terminals and
removes power when the impedance rises above a certain value, for a certain period (for details,
seetheIEEE802.3afspecication).
Capacitive Detection• : If the port and capacitive detection are enabled, the capacitances state
reads in the voltage result from the constant current. This is then subtracted from the pre-
capacitance voltage to get a charge rate. If this charge rate is within the window of the PD
signatures, the device is considered to be discovered.
And then, click to carry into effect.•
Port• : The index of PoE ports.
Enable State• : Check it to enable the PoE function to the port.
A ppl y