Allied Telesis AT-IFS802SP Switch User Manual


  Open as PDF
of 105
 
97AT-IFS802SP/POE(W)-80 User Manual
SystemLog, SMTP and Event Commands Set
Allied Telesis Commands Level Description Example
systemlog ip
[IP address]
G
Set System log server IP
address.
switch(cong)#systemlogip
192.168.1.100
systemlog mode
[client|server|both]
G Speciedthelogmode switch(cong)#systemlogmodeboth
show systemlog E Displays system log. Switch>show systemlog
show systemlog P
Show system log client &
server information
switch#show systemlog
no systemlog G Disable systemlog functon switch(cong)#nosystemlog
smtp enable G Enable SMTP function switch(cong)#smtpenable
smtp serverip
[IP address]
G CongureSMTPserverIP
switch(cong)#smtpserverip
192.168.1.5
smtp sender
[sendername]
G Conguresenderofmail
switch(cong)#smtpsnderaaa@bbb.
com
smtp authentication G
Enable SMTP
authentication
switch(cong)#smtpauthentication
smtp account
[account]
G
Congureauthentication
account
switch(cong)#smtpaccountJohn
smtp password
[password]
G
Congureauthentication
password
switch(cong)#smtppassword1234
smtp rcptemail
[Index] [Email address]
G
CongureRcpte-mail
Address
switch(cong)#smtprcptemail1
Alert@test.com
show smtp P
Show the information of
SMTP
switch#show smtp
no smtp G Disable SMTP function switch(cong)#nosmtp
event device-cold-start
[Systemlog|SMTP|Both] G Set cold start event type
switch(cong)#eventdevice-cold-start
both
event authentication-failure
[Systemlog|SMTP|Both] G
Set Authentication failure
event type
switch(cong)#eventauthentication-
failure both
event ring-topology-change
[Systemlog|SMTP|Both] G
Set X-ring topology
changed event type
switch(cong)#eventring-topology-
change both
event systemlog
[Link-UP|Link-Down|Both]
I
Set port event for system
log
switch(cong)#interfacefastethernet3
switch(cong-if)#eventsystemlogboth
event smtp
[Link-UP|Link-Down|Both]
I Set port event for SMTP
switch(cong)#interfacefastethernet3
switch(cong-if)#eventsmtpboth
show event P Show event selection switch#show event
 previous next