Filter
Top Products
Chapter 1 Setting Up the CoreModule 800
CoreModule 800 QuickStart Guide 11
U5
U2
U1
J1
J3
J7
J8
U9
U11
U12
J6
JP4
J5
D17
J9
JP3
JP1
U13
Q6
Q1
Q4
Q2
U26
Q3
J4
D9 D10
JP2
Flat Panel
Voltage
Select (JP4)
Serial 2 RS-485
Termination (JP2)
CMOS Normal/
Clear (JP1)
Serial 1
RS-485
Termination
(JP3)
CM800QkS_01b
Figure 1-8. CoreModule 800 Jumper Locations
The power adapter cable is connected between the Power In connector (J7) and the power supply
connector. See Steps 5 and 12.
Table 1-2. Power Adapter Cable Wiring
Wire Color Four Pin # To Ten Pin # Signal
Yellow P-1 To P-4 +12V
Black P-2 To P-1 GND
Black P-3 To P-7 GND
Black P-3 To P-9 GND
Red P-4 To P-2 +5V
Red P-4 To P-8 +5V
Red P-4 To P-10 +5V
–––P-3Key
Note: The shaded area denotes power or ground.