Filter
Top Products
OCTO² / QFX402
PAGE 14
Chapter 2 : STARTING
2-1. OCTO² CONNECTIONS
NOTE:
Turn OFF all of your equipment before connecting.
c Connect the AC power supply cord to the device and to an AC power outlet.
d Connect your computer & video sources to the 8 universal inputs of the device.
• If you need to connect a digital computer source, use the input #1 (DVI-I IN connector).
• Connect your others sources to the unused inputs. See following sections to have a complete description.
IMPORTANT:
Connect only one source by input.
e Connect your display device (projector, plasma screen...) to the HD15 or DVI connectors.
f Turn ON the device (rear panel switch). Then turn ON all your input sources and then your display device.
• Connection diagram:
2
2
ANALOG WAY
4
1
2
3
3
2-2. QUATTRO FX
CONNECTIONS
NOTE:
Turn OFF all of your equipment before connecting.
c Connect the AC power supply cord to the device and to an AC power outlet.
d Connect your computer & video sources to the 4 universal inputs of the device.
• If you need to connect a digital computer source, use the input #1 (DVI-I IN connector).
• Connect your others sources to the unused inputs. See following sections to have a complete description.
IMPORTANT:
Connect only one source by input.
e Connect your display device (projector, plasma screen...) to the HD15 or DVI connectors.
f Turn ON the device (rear panel switch). Then turn ON all your input sources and then your display device.
• Connection diagram:
2
4
12
3
3