Filter
Top Products
OCTO² / QFX402
PAGE 24
Chapter 5 : FRONT PANEL DISPLAY MENUS DESCRIPTION
5-1. INTRODUCTION
The front panel display menu presents 2 modes: the STATUS MODE and the CONTROL MODE.
• The STATUS MODE indicates the input and output status of the device.
• The CONTROL MODE allows selecting and adjusting the parameters of the device.
5-2. CONTROL BUTTONS
The front panel display is controlled by 2 buttons and 1 knob:
knob: • In the CONTROL MODE, turn this knob to scroll thru the different menus.
EXIT / MENU button: • In the STATUS MODE, press this button to enter in the CONTROL MODE.
• In the CONTROL MODE, press this button to:
- return to the previous menu without safeguarding the selection.
- return to the STATUS MODE (press several times).
ENTER button: • From the STATUS MODE, press this button to enter in the CONTROL MODE.
• From the CONTROL MODE, press this button to confirm a selected item.
5-3. STATUS MODE
When switching ON, the front panel display shows the product's name and firmware versions as follows:
c OFX803 DEVICE STATUS
d Version _._
e Input: 1 INPUT STATUS
f XGA 60.1K / 60Hz
g Output: 1024x768 OUTPUT STATUS
h Seamless #1 75Hz
c Device model
d Device version.
e Selected input number.
f Format, line & frame frequency of the selected input.
g Output format.
h Switching mode & output frame rate.