Filter
Top Products
APPENDIX A / ANNEXE A OCTO² / QFX402
PAGE 48
COMMAND RESPONSE COMMAND DESCRIPTION VALUE /VALEUR
COMMANDE RÉPONSE DESCRIPTION DE LA COMMANDE
TYPE
MIN MAX DESCRIPTION
FRAME & LOGOS COMMANDS (continued)/ COMMANDES DU MENU LOGO & FRAME (suite)
lE lE Status of the logo memories
Rd
0 1 0 = logo memorized. 1 = empty memory.
lF lF Status of the logo memories
Rd
0 1 0 = logo memorized. 1 = empty memory.
LE LE Luma key level. Rd/Wr 0 255
Le Le Luma key type Rd/Wr 0 1 0 = Black 1 = white
Lb Lb Background color. Rd/Wr 0 7
LR LR
-In recording mode: frame/logo storing.
-In erase mode: frame/logo erasing.
Rd
0 1
1 = STORE (automatic reset).
1 = ERASE (automatic reset).
Lr Lr Stop the frame storing. Rd/Wr 0 1 1 = stop the frame storing (automatic reset).
TL TL Logo 1 transparency Rd/Wr 0 15 0 = mini 15 = maxi
Tl Tl Logo 2 transparency Rd/Wr 0 15 0 = mini 15 = maxi
Ld Ld Fade logo duration (0.01 second step). Rd/Wr 15 255 15 = 0.15 second 255 = 2.5 seconds
Lf Lf Fade frame duration (0.1 second step). Rd/Wr 5 50 5 = 0.1 second 50 = 5 seconds
NOTE: To store a logo you should:
c Select the logo recording mode with the LM command (1LM).
d Adjust the position and size of the logo storing area with the LU, Lu, LK and Lk commands.
e Select the Luma key type (Le command), adjust the luma key level (LE command) and the background color (with Lb
command).
f Select a logo memory with the LC command and do a store with LR command (1LR).
To store a frame display you should:
c Select the frame recording mode with the LM command (3LM), and do a store with the LR command (1LR).
NOTE: To assign a logo/frame to an input you should:
c Select the assignment mode with the LM command (0LM).
d Select the input with the PC command.
e Select a stored logo/frame with LA, LB or LF commands.
f Adjust the horizontal & vertical position of the logo with the LH, Lh, LV & Lv commands.
AUDIO COMMANDS / COMMANDES AUDIO
AC AC Audio source selection. Rd/Wr 1 8 1 = audio source #1.... 8 = audio source #8.
AO AO Audio mode. Rd/Wr 0 1 0 = auto follow 1 = breakaway
AV AV Mater volume. Rd/Wr 0 255
AT AT Mute. Rd/Wr 0 1 0 = mute OFF 1 = mute ON
AS AS Mono/stereo mode. Rd/Wr 0 1 0 = stereo 1 = mono
AL AL Audio level (works with PC command) Rd/Wr 0 64 0 = minimum 1 = maximum
AB AB Audio balance (works with PC) Rd/Wr 0 64 0 = left to maximum 64 = right to maximum
AX AXMU Auxiliary source. Rd/Wr 0 1 0 = used 1= unused.
NOTE: Rd/Wr = Read and write command / Commande de lecture et d'écriture. Rd = Read only command / Commande de lecture uniquement.