Filter
Top Products
OCTO² / QFX402 APPENDIX A / ANNEXE A
PAGE 47
COMMAND RESPONSE COMMAND DESCRIPTION VALUE /VALEUR
COMMANDE RÉPONSE DESCRIPTION DE LA COMMANDE
TYPE
MIN MAX DESCRIPTION
FRAME & LOGOS COMMANDS / COMMANDES DU MENU LOGO & FRAME
LM LM Frame/logo mode. Rd/Wr 0 6
0 = use & assignment mode.
1 = logo recording mode.
2 = animated logo recording mode
3 = frame recording mode.
4 = erasing logo mode.
5 = erasing frame mode.
6 = logo transfer mode.
LX LX Status of the logo programmer
Rd
0 4
0 = free.
1 = logo/frame in recalling process.
2 = logo/frame in storing process.
3 = output format incompatible with the logo.
4 = logo/frame in erasing process.
LA LA Logo index #1 assignment. Rd/Wr 0 9
LB LB Logo index #2 assignment. Rd/Wr 0 9
0 = no logo
1 = logo 1................... 8 = logo 8
9 = animated logo
LF LF Frame assignment. Rd/Wr 0 4
0 = no frame
1 = frame 1 2 = frame 2
3 = frame 3 4 = frame 4
LC LC
• In logo recording mode: Number of
the logo to be store (1 to 8).
• In frame recording mode: Number of
the frame to be store (1 to 4).
• In erase logo mode: number of the
logo to be erase (1 to 8)
• In erase frame mode: number of the
frame to be erase (1 to 4).
Rd/Wr 0 8 In erase mode: 0 = erase all
LD LD Display logo (according to PCH) Rd/Wr 0 1 0 = Display OFF 1 = Display ON
LU LU Horiz. position of the logo storing area. Rd/Wr 0 255
Lu Lu Vert. position of the logo storing area. Rd/Wr 0 255
LK LK Horizontal size of the logo storing area. Rd/Wr 5 255 5 = 3% 255 = 100%
Lk Lk Vertical size of the logo storing area. Rd/Wr 5 255 5 = 3% 255 = 100%
LQ LQ
Pixels number in a line of the storing
area.
Rd
0 65535
Lq Lq Lines number of the storing area.
Rd
0 65535
LH LH Horizontal position of the logo 1. Rd/Wr 0 255
LV LV Vertical position of the logo 1. Rd/Wr 0 255
LW LW Logo 1 horiz. size % output format.
Rd
5 255 5 = 3% 255 = 100%
LS LS Logo 1 vert. size % output format.
Rd
5 255 5 = 3% 255 = 100%
LT LT Logo 1 type (M).
Rd
0 2
0 = incrusting logo
1 = cutting logo
2 = animating logo
LP LP Pixels number in a line of logo 1.
Rd
0 65535
LL LL Lines number in a logo 1.
Rd
0 65535
These 2 commands allow calculating the
duration of the storing.
Lh Lh Horizontal position of the logo 2. Rd/Wr 0 255
Lv Lv Vertical position of the logo 2.
Rd
0 255
Lw Lw Logo 2 horiz. size% output format.
Rd
5 255 5 = 3% 255 = 100%
Ls Ls Logo 2 vert. size % output format.
Rd
5 255 5 = 3% 255 = 100%
Lt Lt Logo 2 type.
Rd
0 2
0 = incrusting logo
1 = cutting logo
2 = animating logo
Lp Lp Pixels number in a line of logo 2.
Rd
0 65535
Ll Ll Lines number in a logo 2.
Rd
0 65535
These 2 commands allow calculating the
duration of the storing.
LN LN Pixels number in a line of a frame.
Rd
0 65535
Ln Ln Line number of a frame.
Rd
0 65535
NOTE: Rd/Wr = Read and write command / Commande de lecture et d'écriture. Rd = Read only command / Commande de lecture uniquement.