Filter
Top Products
Chapter 5 : FRONT PANEL DISPLAY MENUS DESCRIPTION (continued) OCTO² / QFX402
PAGE 36
8-7-6 [Stand by time] + ENTER.
When the device any more detect a signal on the selected input, this one is set in the STANDBY mode after
the duration of your choice. Select a duration with + ENTER.
NOTE:
Select OFF to inactive this function.
8-7-7 [Stand by] + ENTER.
Allows to set the device in STANDBY mode. To coming out the STANDBY mode , press one of the front
panel buttons.
8-8 [Erase memories] + ENTER.
This function allows erasing all the NON-volatile image memories. Select [YES] and validate with ENTER.
8-9 [Default value] + ENTER.
This function allows setting the following functions to the factory settings. Select [YES] and validate with
ENTER.
FUNCTION POSITION
input type Computer HV/C.
used input All used.
H sync load All Hi-Z.
VCR mode All off
output format SXGA 60Hz 4/3.
output sync H&V.
type of screen 4/3
test pattern no
switching seamless #1
pos. settings 0
aspect ratio in 4/3
aspect ratio out 1:1
brightness 128
black level 128
contrast 128
color 128
hue 128
under/overscan overscan
sharpness 3
master volume 192
audio source auto follow
audio level 48
audio balance 32
auxiliary input OFF
mute OFF
display logo all ON
assignment all none
key locking all unlock
fade color R, G, B = 0
RS232/LAN port RS232