Filter
Top Products
OCTO² / QFX402 APPENDIX A / ANNEXE A
PAGE 49
COMMAND RESPONSE COMMAND DESCRIPTION VALUE /VALEUR
COMMANDE RÉPONSE DESCRIPTION DE LA COMMANDE
TYPE
MIN MAX DESCRIPTION
CONTROLS COMMANDS / COMMANDES DU MENU CONTRÔLE
YE YE Erase all memories. Rd/Wr 0 1 1 = erase all memories (automatic reset).
YI YI Auto-lock Rd/Wr 0 1 0 = off 1 = on.
SR SR Red adjustment of the FADE. Rd/Wr 0 255
SG SG Blue adjustment of the FADE. Rd/Wr 0 255
SB SB Green adjustment of the FADE. Rd/Wr 0 255
SW SW Transition. Rd/Wr 0 5
0 = fade color 1 = clean cut
2 = frame 1 3 = frame 2
4 = frame 3. 5 = frame 4
YL YL Sync loss
Rd/Wr 0 15
0 = black 1 = input 1
2 = input 2...................... 8 = input 8
9 = frame 1................... 10 = frame 2
12 = frame 3................. 15 = frame 6
xi xi Identification number byte 0 & 1.
Rd
0 65535
xj xj Identification number byte 2 & 3.
Rd
0 65535
xk xk Identification number byte 4 & 5.
Rd
0 65535
xl xl Identification number byte 6 & 7.
Rd
0 65535
xU VERU Update version.
Rd
0 65535 Example: VERU104 = version 1.4
YR YR DEFAULT VALUE. Rd/Wr 0 1 1 = Default value action (automatic reset).
COMMUNICATION COMMANDS / COMMANDES DE COMMUNICATION
ne ne Communication port selection Rd/Wr 0 1 0 = RS232 1 = LAN
nr nr Reset of the LAN parameters. Rd/Wr 0 1 1 = reset.
ns ns Store the LAN parameters. Rd/Wr 0 1 1 = store.
na na
IP address and port selection (for
modification)
Rd/Wr 0 3
0 = all IP address / ports
1 = IP local address / local port
2 = IP remote address / remote port
3 = IP gateway address.
nw nw
First byte of the address selected by the
na command.
Rd/Wr 0 255
nx nx
Second byte of the address selected by
the na command.
Rd/Wr 0 255
ny ny
Third byte of the address selected by the
na command.
Rd/Wr 0 255
nz nz
Forth byte of the address selected by the
na command.
Rd/Wr 0 255
np np
Number of the port (local or remote)
selected by the na command.
Rd/Wr 0 65500
local port: 10000 to 10999.
remote port: 0 to 65500.
nk nk netmask. Rd/Wr 0 24
Value = number of bit to 0 (from right).
example: 2 255.255.255.252
3 255.255.255.248
.............
8 255.255.255.0.............
24 255.0.0.0
nt TCP protocol selection. Rd/Wr 0 1 0 = UDP 1 = TCP
NOTE: Rd/Wr = Read and write command / Commande de lecture et d'écriture. Rd = Read only command / Commande de lecture uniquement.