Filter
Top Products
Hole Positions for a Stand-alone UPS Enclosure with L-shaped
Anchoring Brackets
Note: Recommended minimum number of screws per enclosure for the L-shaped brackets is
four; one in each corner. Recommended oor bolt size: M8.
Model Width: 352 mm (13.85 in) and 523 mm (20.59 in)
Hole Positions for Up to Four UPS Units in Parallel with U-shaped
Anchoring Brackets
Note: Recommended minimum number of oor screws for the two congurations below
is 10.
Model Width: 352 mm (13.85 in)
10
MGE™ Galaxy™ 3500 10-30 kVA 208/220 V Single and Parallel Installation
990-1957C-001