APC G35T10KF1B2S Power Supply User Manual


 
3. On each side of the same enclosure insert a maximum of nine and a minimum of two M8 screws
(not provided) through holes in the bottom of the enclosure and through holes in the U-shaped
oor anchoring brackets, and into the pre-drilled oor holes.
3
4. Fasten the screws.
4
5. Move the adjacent enclosure on its casters close to the enclosure with the U-shaped oor
anchoring brackets.
Note: If the adjacent enclosure is on its leveling feet, use a forklift or pallet jack to move it
into position to avoid damaging the leveling feet.
14
MGE™ Galaxy™ 3500 10-30 kVA 208/220 V Single and Parallel Installation
990-1957C-001