Filter
Top Products
Remove the Battery Modules
Note: Two people are needed to lift the battery modules.
Note: The XR Battery Enclosures ship with two battery modules. All battery modules in
the UPS and the XR Battery Enclosure(s) must be removed before interconnecting these
enclosures.
Note: When you remove battery modules, start from the highest row and work your way
down.
1
2
3
1. Remove all battery securing brackets (used to secure the batteries during transport) by removing
the M6 Torx screws.
2. Remove the blind plate.
3. To release the battery from its lock mechanism, gently push the battery upwards and then pull it
out while supporting the battery with your other hand.
12
MGE™ Galaxy™ 3500 10-30 kVA 208/220 V Single and Parallel Installation
990-1957C-001