Apple 300 Printer User Manual


 
S Important: Changes or modifications to this product not
authorized by Apple Computer, Inc., could void the FCC
Certification and negate your authority to operate the
product.
This product was tested for FCC compliance under conditions
that included the use of shielded cables and connectors
between system components. It is important that you use
shielded cables and connectors to reduce the possibility of
causing interference to radios, television sets, and other
electronic devices. For Apple peripheral devices, you can
obtain the proper shielded cables from your authorized Apple
dealer. For non-Apple peripheral devices, contact the
manufacturer or dealer for assistance.
S
DOC Class B Compliance This digital apparatus does not
exceed the Class B limits for radio noise emissions from digital
apparatus set out in the radio interference regulations of the
Canadian Department of Communications.
Observation des normes—Classe B Le présent appareil
numérique n’émet pas de bruits radioélectriques dépassant les
limites applicables aux appareils numériques de la Classe B
prescrites dans les règlements sur le brouillage radioélectrique
édictés par le Ministère des Communications du Canada.
s Warning: Making adjustments or performing procedures
other than those specified in your equipment’s manual may
result in hazardous exposure.
s
s Warning: Do not attempt to disassemble the cabinet
containing the laser. The laser beam used in this product is
harmful to the eyes. The use of optical instruments, such as
magnifying lenses, with this product increases the potential
hazard to your eyes. For your safety, have this equipment
serviced only by an authorized Apple service provider.
s
This printer is a Class 1 laser product. It carries a Class 1 label
underneath the printer and a service warning label inside the
printer.
Service warning label
Class 1 label
vi