Filter
Top Products
If you see a blinking question mark on your screen
The blinking question mark means that your Macintosh is unable to find
usable system software on your hard disk.
1Press the Open/Close button of your CD-ROM drive to open the CD-ROM tray.
2Place the
Macintosh Performa CD: Performa Software
in the tray with the disc label
facing up.
Be sure to use the CD with the words “Performa Software” at the top. Make
sure the disc is lying flat in the tray.
3To close the tray, push the tray in or press the Open/Close button.
Your Macintosh recognizes the CD-ROM disc as a startup disk, and in a few
seconds the Macintosh desktop with a Launcher appears.
If you see the Macintosh desktop
1Press the Open/Close button of your CD-ROM drive to open the CD-ROM tray.
2Place the
Macintosh Performa CD: Performa Software
in the tray with the disc label
facing up.
Be sure to use the CD with the words “Performa Software” at the top. Make
sure the disc is lying flat in the tray.
3To close the tray, push the tray in or press the Open/Close button.
4Hold down the C key on your keyboard while you choose Restart from the Special menu.
Continue to hold down the C key until you see the “Welcome to
Macintosh” message.
106
Chapter 6