Filter
Top Products
m System software is not installed on the startup hard disk, the system
software is damaged, or the hard disk is not working properly.
Start up your computer using the Macintosh Performa CD: Performa
Software. Do this by inserting the CD-ROM disc into the CD-ROM drive
and holding down the C key while you restart the computer. (See the
section “Starting Up From the Macintosh Performa CD: Performa Software”
later in this chapter if you need more help.) Then follow the instructions in
“Repairing a Damaged Disk” later in this chapter to test your startup hard
disk and repair any damage.
If repairing the disk doesn’t help, follow the instructions in Chapter 7,
“Reinstalling Your Computer’s Software,” to reinstall system software on
your startup hard disk.
A disk icon with an X appears in the middle of the screen and a floppy disk is ejected
from the disk drive.
This icon indicates that the floppy disk you tried to start up from is not a
startup disk. (When you turn on your computer, it looks first in the floppy
disk drive for a disk containing system software. If the disk in the drive does
not contain system software, the computer ejects the disk and looks on its
internal hard disk for system software.)
Wa it a few seconds. The computer should start up from its internal hard
disk. Make sure you insert floppy disks only after the computer has begun
starting up.
82
Chapter 6