Filter
Top Products
iMac G5 (20-inch iSight) Take Apart —Power Supply, DC/DC, Inverter 11 2
Removing the DC/DC Power Supply/Inverter
Using a torx T10 screwdriver, remove the two power supply, DC-DC inverter screws 1.
connecting the board to the rear housing. Disconnect the two cables; one going to the AC-
DC power supply and the other connecting to the hard drive.
Remove just the circled chassis screws, one of which is the AC lter ground screw. Carefully 2.
lift the chassis frame just enough to pull the inverter cable from under the metal chassis.