Filter
Top Products
iMac G5 (20-inch iSight) Take Apart — Optical Drive 67
Replacing the Optical Drive
Install the black sensor cable and the ex cable to the optical drive with two T6 screws. 1.
Insert the optical drive bezel into the rear housing, lining up the bezel with the slot opening 2.
(#1) . Be sure to align the two guide holes in the front bezel with guide posts at each end of
the drive access hole.
Push down on the mounting brackets (#2) to lock the optical drive securely into place on the
chassis.
Caution: Never press down on or grasp the body of the optical drive when installing it.
Pressing or squeezing the body of the optical drive could damage the mechanism.