Filter
Top Products
iMac G5 (20-inch iSight) Take Apart — Front Bezel 19
Removing the Front Bezel
Position unit on rear cover (back).1.
Tilt up the front bezel and remove three screws along the bottom. 2.
Warning: The ambient light sensor is located next to the center screw. Don’t mistake the
ambient light sensor for a screw. Sticking a screwdriver or other sharp object in the ambient
light sensor could damage the computer.
Slightly bending the upper quarter of the access tool card will help engage the latch more 3.
securely. Refer to the Access Tool Modication if the bezel is dicult to remove.