Filter
Top Products
iMac G5 (20-inch iSight) Take Apart — Display Panel 48
Replacing the Display Panel
Replace the TMDS cable on the rear of the display panel.1.
If removed, replace the metal panel mounting brackets to each side of the display.2.
Connect the four inverter-to-display cable connectors. Remember the connectors are keyed; 3.
dot-side-up.
Replace the display panel with four mounting screws.4.
Connect the TMDS cable connector on the logic board and secure it with two screws.5.
Fold the EMI tape rmly over the left, top, and right edges of the display panel. Use your 6.
ngers or the black stick to adhere the tape rmly and rub out wrinkles. Note: If the tape
was ripped or damaged, replace the damaged EMI tape with new EMI tape
Replace the lower EMI shield.7.
Replace the front bezel.8.
Replace the access door.9.