Filter
Top Products
iMac G5 (20-inch iSight) Take Apart — Lower EMI Shield 35
Replacing the Lower EMI Shield
Position the lower EMI shield over the bottom of the unit so that the holes (for the IR board 1.
and the LED) in the shield are properly aligned.
Press the sticky, edge of the EMI shield onto the bottom side of the display panel. The crease 2.
in the EMI shield should align with the edge of the panel.
Fold down the EMI shield and press it rmly over the bottom edge of the rear housing. Use a 3.
black stick to rub out any air bubbles and ensure that the EMI shield adheres rmly and
without wrinkles along all edges.
Replace the front bezel.4.
Replace the access door.5.