Filter
Top Products
130 Chapter 13 Working With Network Services
Changing DHCP Service Settings
To change a setting:
$ sudo serveradmin settings dhcp:setting = value
To change several settings:
$ sudo serveradmin settings
dhcp:setting
= value
dhcp:setting = value
dhcp:setting = value
[...]
Control-D
DHCP Service Settings
Use the following parameters with the serveradmin command to change settings for
the dhcp service.
Parameter Description
setting
A DHCP service setting. To see a list of available settings, type
$ sudo serveradmin settings dhcp
or see “DHCP Service Settings” on this page and “DHCP Subnet
Settings Array” on page 131.
value
An appropriate value for the setting.
Parameter (dhcp:) Description
logging_level "LOW"|"MEDIUM"|"HIGH"
Default = "MEDIUM"
Corresponds to the Log Detail Level pop-up menu
in the Logging pane of DHCP service settings in
the Server Admin GUI application.
subnet_status Default = 0
subnet_defaults:logVerbosity "LOW"|"MEDIUM"|"HIGH"
Default = "MEDIUM"
subnet_defaults:logVerbosityList:
_array_index:n
Available values for the logVerbosity setting.
Default = "LOW," "MEDIUM," and "HIGH"
subnet_defaults:WINS_node_type Default = "NOT_SET"
subnet_defaults:routers Default = empty_dictionary
subnet_defaults:selected_port_key Default = en0
subnet_defaults:selected_port_key
_list:_array_index:n
An array of available ports.
subnet_defaults:dhcp_domain_name Default = The last portion of the server’s host
name, for example, company.com.
LL2354.book Page 130 Monday, October 20, 2003 9:47 AM