Filter
Top Products
90 Chapter 9 Working With Print Service
Changing Print Service Settings
To change a setting:
$ sudo serveradmin settings print:setting = value
To change several settings:
$ sudo serveradmin settings
print:setting
= value
print:setting = value
print:setting = value
[...]
Control-D
Print Service Settings
Use the following parameters with the serveradmin command to change settings for
the Print service.
Parameter Description
setting
A Print service setting. To see a list of available settings, type
$ sudo serveradmin settings print
or see “Print Service Settings” on this page.
value
An appropriate value for the setting.
Parameter (print:) Description
serverLogArchiveIntervalDays Default = 7
<queue arrays> See “Queue Data Array” on page 91.
serverLogArchiveEnable Default = no
jobLogArchiveIntervalDays Default = 7
jobLogArchiveEnable Default = no
LL2354.book Page 90 Monday, October 20, 2003 9:47 AM