Filter
Top Products
Chapter 13 Working With Network Services 143
Changing NAT Service Settings
To change a setting:
$ sudo serveradmin settings nat:setting = value
To change several settings:
$ sudo serveradmin settings
nat:setting
= value
nat:setting = value
nat:setting = value
[...]
Control-D
NAT Service Settings
Use the following parameters with the serveradmin command to change settings for
NAT service.
Parameter Description
setting
A NAT service setting. To see a list of available settings, type
$ sudo serveradmin settings nat
or see “NAT Service Settings” on this page.
value
An appropriate value for the setting.
Parameter (nat:) Description
deny_incoming yes|no
Default = no.
log_denied yes|no
Default = no.
clamp_mss yes|no
Default = yes
reverse yes|no
Default = no
log yes|no
Default = yes
proxy_only yes|no
Default = no
dynamic yes|no
Default = yes
use_sockets yes|no
Default = yes
interface The network port.
Default = "en0"
LL2354.book Page 143 Monday, October 20, 2003 9:47 AM