Filter
Top Products
Page A-2
Max Util (maximum utilization) LED for the port never blinks (steady light)
❏ Port is overloaded. ❏ Check the port statistics for the
amount of traffic, errors, etc.
being transmitted on the port.
Link LED for the port goes off
❏ Cable connection is broken. ❏ Make sure connectors are seated
correctly in the equipment at
both ends of the cable. Check the
continuity of the wires in the
cable and the pin assignments
on the RJ-45 connectors.
❏ Network station to which the
port is connected has been pow-
ered off.
❏ Make sure the station to which
the port is connected is plugged
in and powered on.
❏ Wrong type of cable is con-
nected between the port and the
equipment.
❏ Make sure the correct type of
cable is connected to the port
(refer to “Connecting to the Net-
work” on page 2-6).
LED Error Type/Cause Solution (Options or Steps)