Filter
Top Products
Set Telnet Idle Time Out
Page 5-35
Set Telnet Idle Time Out
This option sets the Telnet idle time-out period.
If a Telnet connection to the IntraSwitch 5308FL remains idle
for the number of specified time-out minutes, the remote Telnet
connection is automatically disabled.
To set the Telnet Idle Time Out period:
1
Type t from the Configuration Menu.
The following two lines appear at the bottom of
the screen:
Figure 5-14 Set TelNet Idle Time Out command line
The current idle time is displayed in minutes.
2
Enter the number of minutes for the time-out
period at the prompt.
∆ Note: The default and recommended time-
out period is 20 minutes.
To exit this option without making any
changes to the current idle time-out period,
press ctrl-c.
3
Press return.
The Telnet idle time out is configured.