Filter
Top Products
Setting Up For Management
Page 4-6
In-Band
Management
In-band network management allows you to manage, control,
and monitor the IntraSwitch 5308FL and each of its ports over
the Ethernet network.
You can perform these functions by accessing the IntraSwitch
5308FL via one of the following methods:
❏ By connecting with a terminal emulation pro-
gram such as Telnet
1
and using the Local Man-
agement Interface.
❏ By connecting with a supported World Wide
Web browser and using the Web Management
Interface.
❏ By connecting with any SNMP-based network
management application and using its interface.
To manage the IntraSwitch 5308FL via in-band management:
1
Make sure the network to which the IntraSwitch
5308FL is connected is up and functioning.
2
Make sure the IntraSwitch 5308FL is powered
on and is configured with valid IP information.
See “Setting up for Management” on page 2-12
for instructions.
3
Connect to the IntraSwitch 5308FL with a termi-
nal emulator, a supported World Wide Web
browser, or any SNMP-based network manage-
ment application.
Terminal Emulator
See Chapter 5, “Console Management,” for infor-
mation on managing the IntraSwitch 5308FL
with a terminal emulator.
1. Telnet is a common terminal emulation application used in TCP/IP net-
works for remote terminal access to network devices.