Filter
Top Products
Configure TCP/IP Parameters
Page 5-13
Changing TCP/IP Information
To change the IntraSwitch 5308FL’s IP address, subnet
mask, or default gateway information:
1
Open the TPC/IP Parameter Menu by typing i
in the Configuration Menu.
2
Type the command letter of the option you
want to change.
3
Type the new address at the prompt.
See Table 5-6 for a description of each param-
eter.
▲ Important! Follow the format: num-
ber.number.number.number.
To cancel a selected option, press ctrl-c at
the command prompt.
4
Press return.
The IntraSwitch 5308FL’s TCP/IP information
is configured.
To quit and return to the Configuration
Menu, type q.